Solar Hybrid Inverter

Approx. Rs 59,000 / PieceGet Latest Price

FlinInfini Lite is an On-Grid Solar Inverter that lets you store energy as well as sell excess power generated via solar back to grid.

With a typical on-grid solar inverter, one cannot use batteries. Batteries are mandatory with FlinInfini Lite model which in turn provides you power during power cuts or during the night. Also, if your utility company and state regulations allows you to sell excess power back to the grid, then FlinInfini Lite is your perfect choice. FlinInfini Lite comes with the provision of enabling or disabling net metering. Have excess power generated, sell it back to the utility and save/make money.

These come in 4 variations: FlinInfini Lite 2kW-24V, 4kW-48V, 5kW-48V and three-phase 6kW-48V Smart Hybrid Inverters. Among these, 4kW-48V and 5kW-48V has an added feature of connecting multiple such models in parallel with each other.

Additional Information:

Approx. Rs 1.45 Lakh / PieceGet Latest Price

• Colorful touch LCD, IP65 protection degree
• 6 time periods for battery charging/discharging
• Max. charging/discharging current of 120A
• Max.16pcs parallel
• DC couple and AC couple to retrofit existing solar system
• Support storing energy from diesel generator
• 24/48V low voltage battery, safe and reliable
• Unique Smart Load application and Grid peak shaving function
• 4ms fast transfer from on-grid to off-grid mode, ensuing the traditional fixed frequency air conditioner works well

Additional Information:

Approx. Rs 6,500 / NumberGet Latest Price

• Rated AC power: 850VA, 12V
• Operating Voltage 100-290V
• Max supported panel power: 12V upto 1000 Wp
• Charge Controller Rating - 40 Amp/12V, with 98% efficiency for fast charging
• Supports single battery
• 24 Month Warranty
• Sine wave Solar hybrid UPS with 85% efficiency
• Savings of 25-30% on electricity bills by reducing charging time with the help of Intelligent Logic Control
• Power savings of 1.5 - 3 units per day* with the help of Intelligent Solar Optimization Technique (iSOT).
• Fast battery charging through i-Charge Technology, on grid power, if case of long power cuts
• Sine wave output for safety of your sensitive appliances and noiseless operations.
• Battery charging commences from 110 Volt which makes it suitable for both urban and rural areas
• Supports ECO Mode (180V to 260V), & UPS mode (extended voltage range)
• Extensive Safety and Protection through built in features for monitoring the health of your batteries and protects them against deep discharge, overcharge and short-circuit. The Main fuse for protection against excessive current thereby ensuring safety of your sensitive appliances.
• Battery type selector to configure charging currents as per connected battery.

   

  ISOT Technology

  NXG Solar UPS uses Intelligent Solar Optimization Technique (ISOT). Once the batteries get charged, it cuts off grid power and supplies electricity through solar panels thus maximizing solar energy usage. This helps you save up to 3 units of electricity per day. Substantial money savings in the long run.

  Fast charging through i-Charge Technology

  If there are long power cuts in your area, you can use the i-charge fast charging mode for charging batteries in a short time when grid power is available. Note that when i-Charge is switched ON, Power saver mode is deactivated and the ups takes higher charging current from the grid. To activate this mode, use the i-charge ON/OFF switch at the back.

  ECO and UPS mode

  The NXG Solar UPS can run on two modes - UPS and ECO mode. UPS mode should be selected when the user wants to run computers. In the UPS mode, the system switches to battery backup if the mains voltage drops below 180 V.

  Safety and Protection

  Luminous NXG comes with many safety features built in. It continuously monitors the health of your batteries and protects them against deep discharge, overcharge and short-circuit. The Main fuse protects against excessive current thereby protecting your sensitive appliances.

  Pure Sine Wave

  Its pure sine wave output ensures safety and noiseless operation of connected appliances.

Approx. Rs 7,000 / NumberGet Latest Price

• Rated AC power: 700VA, 12V
• Operating Voltage 100-290V
• Max supported panel power: 12V upto 1000 Wp
• Charge Controller Rating - 40 Amp/12V, with 98% efficiency for fast charging
• Supports single battery
• 24 Month Warranty
• Sine wave Solar hybrid UPS with 85% efficiency
• Savings of 25-30% on electricity bills by reducing charging time with the help of Intelligent Logic Control
• Power savings of 1.5 - 3 units per day* with the help of Intelligent Solar Optimization Technique (iSOT).
• Fast battery charging through i-Charge Technology, on grid power, if case of long power cuts
• Sine wave output for safety of your sensitive appliances and noiseless operations.
• Battery charging commences from 110 Volt which makes it suitable for both urban and rural areas
• Supports ECO Mode (180V to 260V), & UPS mode (extended voltage range)
• Extensive Safety and Protection through built in features for monitoring the health of your batteries and protects them against deep discharge, overcharge and short-circuit. The Main fuse for protection against excessive current thereby ensuring safety of your sensitive appliances.
• Battery type selector to configure charging currents as per connected battery.

   

  ISOT Technology

  NXG Solar UPS uses Intelligent Solar Optimization Technique (ISOT). Once the batteries get charged, it cuts off grid power and supplies electricity through solar panels thus maximizing solar energy usage. This helps you save up to 3 units of electricity per day. Substantial money savings in the long run.

  Fast charging through i-Charge Technology

  If there are long power cuts in your area, you can use the i-charge fast charging mode for charging batteries in a short time when grid power is available. Note that when i-Charge is switched ON, Power saver mode is deactivated and the ups takes higher charging current from the grid. To activate this mode, use the i-charge ON/OFF switch at the back.

  ECO and UPS mode

  The NXG Solar UPS can run on two modes - UPS and ECO mode. UPS mode should be selected when the user wants to run computers. In the UPS mode, the system switches to battery backup if the mains voltage drops below 180 V.

  Safety and Protection

  Luminous NXG comes with many safety features built in. It continuously monitors the health of your batteries and protects them against deep discharge, overcharge and short-circuit. The Main fuse protects against excessive current thereby protecting your sensitive appliances.

  Pure Sine Wave

  Its pure sine wave output ensures safety and noiseless operation of connected appliances.

Approx. Rs 1.3 Lakh / NumberGet Latest Price

• Inbuilt MPPT Charge Controller.
• Inbuilt O/P Isolation Transformer.
• Bi-directional PCU.
• Selectable source priority.
• 32 bit DSP controller.
• MOSFET/IGBT switching element.
• Dual MCB Protection.
• Compliance to IEC.

Approx. Rs 46,000 / NumberGet Latest Price

• Rated AC power - 230V, 13A, Single phase
• Max Supported Panel Power - 3300 Wp, Input Voltage Range (Vmp) - 60-130V
• Charge Controller - MPPT, Input Voltage 80-165 Voc
• Nominal Battery Bank Voltage - 48V (Supports 2 Batteries)
• Intelligent system with 32 bit DSP Controller which enables it to handle multiple algorithms efficiently
• Inbuilt MPPT charge controller extracts upto 30% more power from Panels
• Inbuilt isolation transformer to protect from grid surges and noise
• Selectable source priority: Choose source priority from solar, battery and grid
• User friendly Informative LCD Display for time charging, Supply etc
• Dual MCB protection against short circuit protection for AC and DC
• Safe for your home with comprehensive protection features such as short-circuit, reverse polarity, battery over-charge and battery deep-discharge.
• Pure sine wave output for safety and noiseless operation of connected appliances.
• Compliance to most of the National & International standards for safety and efficiency and reliability, such as IEC - 61683, IEC - 60068 - 1,2,14,30, IEC - 60529

Approx. Rs 23,000 / NumberGet Latest Price

Approx. Rs 4,800 / NumberGet Latest Price

• Intelligent logic control.
• Runs AC and DC appliances.
• Intelligent battery monitoring.
• Fast charging of batteries from solar.
• Battery charging commences at 110VoIt.
• Pure sine wave UPS with 85% efficiencyff.
• iSOT: Intelligent solar optimization technique.
• Inbuilt charge controller with 98% efficiency.
• Protects battery from over charge for longer life.
• 25-30% savings on electricity bill, Reduced charging time.
• Very safe for sensitive products like TV, PC,laptops & Refrigerators.

Approx. Rs 74,550 / PieceGet Latest Price

Special Features

• Pure sine wave inverter with 93% peak efficiency

• In-built solar charge controller

• Double surge power capacity

• Advanced monitoring software included

• Selectable input voltage range based on appliances

• Auto restart function and cold start functions

• Overload and short circuit protection

• Compatible with mains voltage and generator power

• Advanced charging algorithm for improved battery performance

Approx. Rs 7,800 / NumberGet Latest Price

·         Micro-Controller DSPIC Based Intelligent Control Design.

·         Dual Charging, Mains Mode and Solar Mode.

·         Pure Sine Wave Regulated Output.

·         Smart PWM Controlled multistage ATM (Automatic Trickle Mode) Charging.

·         LCD and Graphical Display Indications (Status & Fault).

·         Smart and Faster Overload Sense and Short Circuit Protection.

·         Auto Reset Feature.

·         Mains Input Voltage Range Selection.

·         PV Mode ON/OFF Selection Switch.

·         Charging Voltage Selection Switch.

·         Grid Charging Enable /Disable Selection.

·         Pure Sine wave Regulated Output.

Approx. Rs 8,800 / NumberGet Latest Price

·         Micro-Controller DSPIC Based Intelligent Control Design.

·         Dual Charging, Mains Mode and Solar Mode.

·         Pure Sine Wave Regulated Output.

·         Smart PWM Controlled multistage ATM (Automatic Trickle Mode) Charging.

·         LCD and Graphical Display Indications (Status & Fault).

·         Smart and Faster Overload Sense and Short Circuit Protection.

·         Auto Reset Feature.

·         Mains Input Voltage Range Selection.

·         PV Mode ON/OFF Selection Switch.

·         Charging Voltage Selection Switch.

·         Grid Charging Enable /Disable Selection.

·         Pure Sine wave Regulated Output.

Approx. Rs 10,500 / NumberGet Latest Price

·         Micro-Controller DSPIC Based Intelligent Control Design.

·         Dual Charging, Mains Mode and Solar Mode.

·         Pure Sine Wave Regulated Output.

·         Smart PWM Controlled multistage ATM (Automatic Trickle Mode) Charging.

·         LCD and Graphical Display Indications (Status & Fault).

·         Smart and Faster Overload Sense and Short Circuit Protection.

·         Auto Reset Feature.

·         Mains Input Voltage Range Selection.

·         PV Mode ON/OFF Selection Switch.

·         Charging Voltage Selection Switch.

·         Grid Charging Enable /Disable Selection.

·         Pure Sine wave Regulated Output.

Approx. Rs 35,000 / NumberGet Latest Price

• Rated AC power - 230V, 8.6A, Single phase
• Max Supported Panel Power - 2200 Wp, Input Voltage Range (Vmp) - 65-130V
• Charge Controller - MPPT, Input Voltage 80-165 Voc
• Nominal Battery Bank Voltage - 48V (Supports 2 Batteries)
• Intelligent system with 32 bit DSP Controller which enables it to handle multiple algorithms efficiently
• Inbuilt MPPT charge controller extracts upto 30% more power from Panels
• Inbuilt isolation transformer to protect from grid surges and noise
• Selectable source priority: Choose source priority from solar, battery and grid
• User friendly Informative LCD Display for time charging, Supply etc
• Dual MCB protection against short circuit protection for AC and DC
• Safe for your home with comprehensive protection features such as short-circuit, reverse polarity, battery over-charge and battery deep-discharge.
• Pure sine wave output for safety and noiseless operation of connected appliances.
• Compliance to most of the National & International standards for safety and efficiency and reliability, such as IEC - 61683, IEC - 60068 - 1,2,14,30, IEC - 60529